| |
 |
| 10-2-FM-16 10” 16 Ohm Compact Floor Monitor |
|
|
 |
| The 10-2-FM-16 is our most popular non co-ax floor monitor. This monitor was originally conceived when we walked into a house of worship to find the minister had eight monitors in parallel on one mix. Finding that this was a common problem, this small, highly efficient 16 Ohm floor monitor was born. It has four tilt angles, 98 dB sensitivity, and 300 watt power handling. If your amp goes to 2 ohm you can put eight of them on one mix. Due to its 16 Ohm impedance it works well in perimeter systems in auditoriums, clubs, and similar situations. |
|
| |
|
Specifications:
| System Type |
Vented Box |
| Active or Passive |
Passive |
| Program Power ( Watts ) |
300 Watts |
| Bi-ampable |
no |
| Nominal Impedance (Ohms) |
16 Ohms |
| Sensitivity (dB @ 1Watt/1m) |
98 |
| Max SPL (dB) |
119 |
| Frequency Response (Hz +/- 3dB) |
65 - 20k |
| Crossover Frequency (Hz) |
2.2 kHz |
| Driver Configuration |
10" woofer, 1 " Compression Driver |
| HF Driver(s) |
1" compression driver with 2" voice coil |
| HF Program Power ( Watts ) |
80W |
| HF Impedance (Ohms) |
16 Ohm |
| HF Horn Dispersion |
Conical 70º |
| HF Protection |
Solid State Compression |
| LF Driver(s) |
10" woofer |
| LF Program Power ( Watts ) |
300W |
| LF Impedance (Ohms) |
16 Ohms |
| Inputs – 1/4" Jacks |
Dual |
| Inputs - Speakon NL4's |
optional |
| Corners |
no |
| Feet |
optional |
| Bar Handles |
1 |
| Enclosure Materials |
3/4" 11 ply & 12" 9 ply birch plywood |
| Grille |
16 Ga. Perforated Steel |
| Finish / Covering |
Highly durable Durablast polyurea coating. |
| Dimensions (DWH, inches) |
11 7/8 x 16 7/8 x 13 inches |
| Dimensions (DWH, cm) |
30 x 43 x 33 cm |
| Weight (lbs/kg) |
27 lbs / 12.3 kg |
*Some options may alter price.
|
| |
|
|
|
|
| |
|
|
