Ramsdell Pro Audio
  www.RamsdellProAudio.com
  (728) 823-8037    Fax: (727) 823-0371
12-CXFM-2
12 CXFM-2 15” Co-ax 2” Compression Driver

     

     Unbelievably clean and clear, this monitor was developed to be a smaller companion to the 15 CXFM. Size for size, this floor monitor has out performed all of its potential competitors for low end punch out of a small enclosure. This monitor’s sound will surprise you because if its completely unique design.

     The 12 CXFM uses what we, the developers of it, call a "ground loaded" port. This Ramsdell Pro Audio–designed port is oversized and directly coupled to the floor, resulting in less power compression, less port wind noise and better power handling characteristics. This allows the speaker to use the ground as an extension of its port and deliver low end in a way that another 12” monitors usually couldn’t. The result is absolutely stunning. The angle of the speaker baffle was carefully chosen to match the 75 degree dispersion of the speaker itself. There is no need for a multi-tilt design, so the new port technology always works perfectly. This monitor also has a very consistent frequency response as you move around in the sound field during your performance. The CXFM series’ killer design sets this monitor apart from any other monitor in the market, and the difference is clearly audible

 

 

Specifications:

System Type Vented Box
Program Power ( Watts ) 800W
Bi-amp or Passive optional
Nominal Impedance (Ohms) 8 Ohms
Sensitivity (dB @ 1Watt/1m) 100
Max SPL (dB) 129
Frequency Response (Hz +/- 3dB) 55-20k
Crossover Frequency (Hz) 1400
Driver Configuration 12" Coaxial
HF Driver(s) 1.5" 3" Voice Coil Driver
HF Program Power ( Watts ) 150W
HF Impedance (Ohms) 8 Ohm
HF Horn 70º conical cone of woofer , 12" Horn
HF Protection Solid State Compression
LF Driver(s) 12" Woofer with 4" voice coil
LF Program Power ( Watts ) 800W
LF Impedance (Ohms) 8 Ohms
Inputs – Speakon Neutrik On the passive version, dual NL4 with pins 1 low and 2 high
Corners no
Feet optional
Bar Handles 2
Enclosure Materials 1/2" 9 ply birch plywood
Grille 16 Ga. Perforated Steel
Finish / Covering Highly durable Durablast polyurea coating.
Dimensions (DWH, inches) 22 x 15 1/2 x 17 1/4 inches
Dimensions (DWH, cm) 55 x 39 x 44 cm
Weight (lbs/kg) 55 lbs / 25 kg

*Some options may alter price.

 
 
 
© 2004-2007 Ramsdell Pro Audio. All Rights Reserved.