Ramsdell Pro Audio
  www.RamsdellProAudio.com
  (728) 823-8037    Fax: (727) 823-0371
PS-2-15-X-SS
PS-2-15-X-SS Double 15" Powered Full-Range

     

     The PS-2-15-X-SS Double 15" Powered Full Range is the highest output powered full range production cabinet we make. The component combination of two 15" Neodymium woofers and a centrally located 2" high frequency horn produce impressive increased projection and pattern control over standard single or double 15" designs. It has much more power efficiency and more even coverage than a standard single 15" 2-way cabinet. This box has 6 dB higher output than our PS-15-X-SS Powered Model. Every effort has been made to produce the highest output in the smallest, lightest double 15" powered speaker available. Using all Neodymium components and bi-amplified by its own powerful and lightweight amp makes the size to weight performance ratio even better. The Neodymium woofers come with replaceable baskets for easy repair.

     The PS-2-15-X-SS was originally designed to combine with our PSW 3-15 Powered sub to cover the mid to upper range frequencies and keep up with its output. This killer sub/mid-high combination is absolutely stunning in output and clarity.

 

 

Specifications:

System Type Powered Double 15" Vented Enclosure
Active or Passive Active
Program Power ( Watts ) 950 Watts RMS, 1400 Watts Program
Bi-amp Operation only Yes
Nominal Impedance (Ohms) 4 Ohms
Sensitivity (dB @ 1Watt/1m) 103
Max SPL (dB) 134
Frequency Response (Hz +/- 3dB) 70 - 20k
Crossover Frequency (Hz) 700 Hz
Driver Configuration 2 x 15" L.F Drivers & one 2" H.F. Compression Driver, All Neodymium
HF Driver(s) 3" Voice Coil, 2" Compression Neodymium
HF Program Power ( Watts ) 150W
HF Impedance (Ohms) 8 Ohms
HF Horn 2"
HF Horn Dispersion (ºH x ºV) 60º x 40º
HF Protection Compressor, Limiter
LF Driver(s) Two Neodymium 15", with 3" Voice Coil
LF Program Power ( Watts ) 650W
LF Impedance (Ohms) 4 Ohm
Inputs 2 XLR inputs, 1 Male and 1 Female
Corners optional
Feet optional
Flying Hardware available
Wheels no
Bar Handles yes
Enclosure Materials 3/4" 11 Ply Birch Plywood and 1/2" 9 Ply Birch Plywood
Baffle Material 1/2" 9 Ply Birch Plywood
Grille
16 Ga. Perforated Steel
Finish / Covering Highly durable Durablast polyurea coating.
Dimensions (DWH xback W, inches) 19 1/4 x 17 x 40 5/8 inches
Dimensions (DWH xback W, cm) 49 x 43 x 103 cm
Weight (lbs/kg) 90 lbs / 40.9 kg

*Some options may alter price.

 
 
 
© 2004-2007 Ramsdell Pro Audio. All Rights Reserved.