Ramsdell Pro Audio
  www.RamsdellProAudio.com
  (728) 823-8037    Fax: (727) 823-0371
UBS 15-2
UBS 15-2 Single High Power 15"


 

UBS 15-2 Shown in optional install color

     

     The UBS 15-2 will fill most higher-output needs in a low ceiling height situation.

     The entire UBS line was birthed and designed as a solution to the low-ceiling related problems that arise during house of worship install situations. Over time, the UBS 15-2 has evolved into so much more than simply a house of worship install speaker. It is versatile and is equally as useful as in night clubs with low ceilings as it is in a house of worship situation. Because the UBS 15-2 designed for permanent install only, it is not available in portable, “road-ready” models. We developed a horizontal low profile, high-power 15” 2 way speaker that performs as good as one that has the room to hang normal. We had customers that were misusing our 15-X-SS by turning it sideways and then expecting it to work as well as if it were hanging the way we designed it to. This speaker does that by marrying an asymmetrical horn with the proper passive network to a 15” woofer.

     We arrived with best solution to a difficult problem. Properly tilted, this enclosure fills a room more accurately than the traditional solution. Every good contractor should get to understand the capabilities of this cabinet by studying its specifications and learning how it could be their solution to a difficult problem.

 

 

Specifications:

System Type Vented 15" 2-way
Active or Passive Passive network only
Program Power ( Watts ) 1400W
Bi-ampable No
Nominal Impedance (Ohms) 8 Ohms
Sensitivity (dB @ 1Watt/1m) 98
Max SPL (dB) 128 dB
Frequency Response (Hz +/- 3dB) 55-18k
Crossover Frequency (Hz) 1100
Driver Configuration one 15 ", one 1" compression driver
HF Driver(s) 2" compression driver with a 3" voice coil
HF Program Power ( Watts ) 150W
HF Impedance (Ohms) 8 Ohms
HF Horn Asymetrical
HF Dispersion (ºH bottom x ºH top x ºV) 100º bottom H x 55º top H x 60ºV
HF Protection Solid State Compression
LF Driver(s) 15" woofer with 4" voice coil and replaceable basket
LF Program Power ( Watts ) 1400W
LF Impedance (Ohms) 8 Ohms
Inputs Available in permanent install barrier strips only
Inputs – Barrier Strip 10 Ga. Barrier Strip
Flying Hardware 3/8" tee nuts for forged shoulder bolts
Enclosure Materials 1/2" 9 Ply Birch
Grille 16 Ga. Perforated Steel (can be covered in cloth)
Finish / Covering Highly durable Durablast polyurea coating.
Dimensions (DWH, inches) 19 x 17 x 33 3/8 inches
Dimensions (DWH, cm) 48 x 43 x 85 cm
Weight (lbs/kg) 90 lbs. / 41 kg.

*Some options may alter price.

 
 
 
© 2004-2007 Ramsdell Pro Audio. All Rights Reserved.