Ramsdell Pro Audio
Main    -   Products   -   Order   -   Email
  Company | Consulting | Support | Contact  
Full-Range Section - All Horn Loaded  
Power you can feel. Quality you can rely on.
 
 
Products
How to Order
Warranty
How to Choose the Best Sub Woofer
How to Pick out a good floor monitor
 
 
 
CPH-2
CPH-2 Fully Horn Loaded Single 12" Down Fill Speaker Cabinet
     This enclosure is the top section of the CPH-3. It was originally developed as a down fill speaker to be hung underneath the CPH-3. It functions as a stand alone speaker in highly reverberant environments where response below 80 Hz (such as vocals) isn’t needed. The CPH-2 is popular in houses of worship because it has the ability to put the sound where the people are, not on the walls or ceiling where you don’t want it because that creates reverb. In good sounding environments, it’s superb and in bad sounding environments, like gymnasiums, it’s necessary. The CPH-2 has good projection and efficiency as well as good pattern control to 400 Hz. It is very effective for its small size. As well as being a good stand alone speaker, it also works well with a separate subwoofer like the TL 18.1 or the TL 15.1.

 

CPH-2, Flown below cluster in down-fill arrangement shown above
click for larger image

 
White CPH-2 house of worship permanent install version
click for larger image
Specifications:
System Type Vented 2-Way Horn Loaded
Bi-ampable Bi-amp recommended
Bi-amp Operation Only Passive Network Available
Nominal Impedance (Ohms) 8 Ohms
Sensitivity (dB @ 1Watt/1m) Average 109
Max SPL (dB) 136
Frequency Response (Hz +/- 3dB) 85 - 18k
Crossover Frequency (Hz) 1200 Hz
Driver Configuration 1 - 12" 1 - 2" Compression Driver
HF Driver(s) 2" Neodymium 3" Voice Coil
HF Program Power ( Watts ) 150
HF Impedance (Ohms) 8
HF Horn 60º H x 40ºV
HF Protection Passive Solid State Compression
Mid Bass Driver 12" Neodymium with 3" voice coil
MF Program Power ( Watts ) 600W
MF Impedance (Ohms) 8
MF Horn 60º H x 40ºV
Inputs – Speakon Neutrik 2 NL4 on downfill version, with pins 1 low and pins 2 high
Corners optional
Feet no
Flying Hardware optional fly track
Wheels no
Bar Handles 4 on portable version
Enclosure Materials 1/2" Birch Ply on permanent install
Grille 16 Ga. Perforated Steel
Finish / Covering Highly durable polyurea coating. Click to learn more
Dimensions (DWH xback W, inches) 22 1/2 x 25 x 20 1/2 x 17 7/8 inches
Dimensions (DWH xback W, cm) 57 x 63.5 x 52 x 45.4 cm
Weight (lbs/kg) 100 lbs / 45.5 kg

*Some options may alter price.

 
Back to top
Company | Products | Consulting | Order
Ramsdell Pro Audio    Main    -  Contact   - Web Master  -   Email  (727) 823-8037
© 2004-2007 Ramsdell Pro Audio. All Rights Reserved.