Ramsdell Pro Audio
Main    -   Products   -   Order   -   Email
  Company | Consulting | Support | Contact  
Line Array Section  
Power you can feel. Quality you can rely on.
 
 
Products
How to Order
Warranty
How to Choose the Best Sub Woofer
How to Pick out a good floor monitor
 
 
 
LA-1-12i Permanent Install Line Array, Vented 12" 2-Way

LA-1-12i Permanent Install Line Array

     The LA-1-12i is a biampable 12” 2-way line array system that employs our top of the line components. We have developed a new wave guide specifically for this array. We use a single 4” voice coil, 2” high-frequency compression driver. The compression driver has a titanium diaphragm and uses a neodymium magnet structure for unparalleled midrange definition and power. The design of the driver literally saves twenty pounds compared to its ceramic equivalent and weight is vital in every line array. The woofer uses the best Mogami cone made and neodymium magnet structure resulting in the most accurate reproduction of sound. The combination of these in the LA-1-12i line array system results in stunning midrange and high frequency output and detail.

     The LA-1-12 install is a permanently hung version of our tour enclosure. The hanging hardware is totally adjustable to any fraction of the 1 deg to 10 deg range of adjustment on each enclosure. The permanent install hardware is less expensive and has better sight lines for houses of worship and auditoriums.The top flybar allows the user to tilt the whole array at once with its many available fly points. This array is perfect for houses of worship, performing arts centers, auditoriums and large clubs.

 
Specifications:
System Type Line Array - Vented 12" 2-way
Active or Passive Biamp operation with external amplification (not included)
Program Power ( Watts ) 1450W Total Program
Bi-ampable Yes
Nominal Impedance (Ohms) 8 Ohms
Sensitivity (dB @ 1Watt/1m) 99 dB
Max SPL (dB) 132 dB long term average
Frequency Response (Hz +/- 3dB) 55- 18k
Crossover Frequency (Hz) Active crossover program supplied with array
Driver Configuration 12" Neo. woofer & 2" H.F. Compression Driver
HF Driver(s) One 4" Voice coil; 2" exit; neodymium; titanium diaphragm
HF Program Power ( Watts ) 125 Watts continuous, 250 Watts program
HF Impedance (Ohms) 8 Ohms
HF Horn Constant pressure wave guide,
110 º x 10º
HF Dispersion (°H x °V) 110° x 10°
HF Protection Solid State Compression
LF Driver(s) One 12" woofer, 4" voice coil
LF Program Power ( Watts ) 500W Continuous, 1000W Program
LF Impedance (Ohms) 8
Inputs Dual Speakon NL4
Inputs - Speakon Neutrik 4-pin Pins One Low, Pins Two High
Corners no
Feet no
Flying Hardware Proprietary, unlimited adjustments over 0-10° range
Wheels no
Bar Handles 2
Enclosure Materials 12 to 25 mm 18 Ply Birch Plywood
Baffle Material 12 to 25 mm 18 Ply Birch Plywood
Grille
16 Ga. Perforated Steel with foam on inside
Finish / Covering Highly durable DuraBlast polyurea coating. Click to learn more.
Optional Finish / Covering Available in custom colors for install or other
Dimensions (DWH xback W, inches) 19 x 28.5 x 15.25 x 11.25 inches
Dimensions (DWH xback W, cm) 48.3 x 72.4 x 38.7 x 28.6 cm
Weight (lbs/kg) 74 lbs. / 33.6 kg
 
Back to top
Company | Products | Consulting | Order
Ramsdell Pro Audio    Main    -  Contact   - Web Master  -   Email  (727) 823-8037
© 2004-2007 Ramsdell Pro Audio. All Rights Reserved.