Ramsdell Pro Audio
Main    -   Products   -   Order   -   Email
  Company | Consulting | Support | Contact  
Floor Monitor Section - High End Line  
 
 
Products
How to Order
Warranty
How to Choose the Best Sub Woofer
How to Pick out a good floor monitor
 
 
 
15-CXFM
15 CXFM-2 15” Co-ax 2” Compression Driver

     The 15-CXFM-2 has a studio monitor sound in a floor monitor format. This great monitor is a larger, 15”, version of our 12-CXFM-2. The 15 CXFM-2 has a 15" 4" voice coil coaxial woofer. It has the same 1.5" throat compression driver which uses the cone of the 15" low frequency speaker as an extension of its horn.

     The 15-CXFM uses what we, the developers of it, call a "ground loaded" port. This Ramsdell Pro Audio–designed port is oversized and directly coupled to the floor, resulting in less power compression, less port wind noise and better power handling characteristics. This allows the speaker to use the ground as an extension of its port and deliver low end in a way that monitors usually can’t. The result is absolutely stunning. The angle of the speaker baffle was carefully chosen to match the 75 degree dispersion of the speaker itself. There is no need for a multi-tilt design, so the new port technology always works perfectly. This monitor also has a very consistent frequency response as you move around in the sound field during your performance. The CXFM series’ killer design sets this monitor apart from any other monitor in the market, and the difference is clearly audible.

click for larger image
 
Specifications:
System Type Vented Box
Program Power ( Watts ) 800W
Bi-amp or Passive optional
Nominal Impedance (Ohms) 8 Ohms
Sensitivity (dB @ 1Watt/1m) 100
Max SPL (dB) 129
Frequency Response (Hz +/- 3dB) 45-20k
Crossover Frequency (Hz) 1200
Driver Configuration 15" Coaxial
HF Driver(s) 1.5" 3" Voice Coil Driver
HF Program Power ( Watts ) 150W
HF Impedance (Ohms) 8 Ohm
HF Horn 70º conical cone of woofer
HF Protection Solid State Compression
LF Driver(s) 15" Woofer with 4" voice coil
LF Program Power ( Watts ) 800W
LF Impedance (Ohms) 8 Ohms
Inputs – Speakon Neutrik On the passive version, dual NL4 with pins 1 low and 2 high
Corners optional
Feet optional
Bar Handles 2
Enclosure Materials 3/4" 11 ply birch plywood
Grille 16 Ga. Perforated Steel
Finish / Covering Highly durable DuraBlast polyurea coating. Click to learn more.
Dimensions (DWH, inches) 22 1/2 x 27 1/4 x 18 1/4 inches
Dimensions (DWH, cm) 57 x 69 x 46.3 cm
Weight (lbs/kg) 77 lbs / 35 kg

*Some options may alter price.

Back to top
Company | Products | Consulting | Order
Ramsdell Pro Audio    Main    -  Contact   - Web Master  -   Email  (727) 823-8037
© 2004-2007 Ramsdell Pro Audio. All Rights Reserved.