Ramsdell Pro Audio
Main    -   Products   -   Order   -   Email
  Company | Consulting | Support | Contact  
Floor Monitor Section - Economy Line  
Power you can feel. Quality you can rely on.
 
 
Products
How to Order
Warranty
How to Choose the Best Sub Woofer
How to Pick out a good floor monitor
 
 
 
8-CXFM
8-CXFM 8” Co-ax

    This speaker was originally developed to provide a small monitor of higher output than the "Top of mic stand" type spot monitors. This little co-ax design 8" speaker provides a very uniform frequency response as you move around in the sound field and this is important in a near field / close range monitor. This results in better-feed back control in a real world usage. This is much more difficult in a small monitor with double side-by-side speakers used by other manufacturers. This small monitor works well on the floor in moderate sound level environments and works well on a stand or within 1 to 1.5 meters in high noise environments. Comes with three tilt angles that will fill any angle requirement.

 
Specifications:
System Type Vented Box
Program Power ( Watts ) 300W
Nominal Impedance (Ohms) 8 Ohms
Sensitivity (dB @ 1Watt/1m) 95
Max SPL (dB) 119
Frequency Response (Hz +/- 3dB) 110-20k
Crossover Frequency (Hz) 2.8k
Driver Configuration 8" Coaxial
HF Driver(s) 1"
HF Horn 70º conical cone of woofer
HF Protection Solid State Compression
LF Driver(s) 8" Woofer
Inputs dual 1/4" jacks
Corners no
Feet optional
Spring Handles 1
Enclosure Materials 1/2" 9 ply birch plywood
Grille 16 Ga. Perforated Steel
Finish / Covering Highly durable DuraBlast polyurea coating. Click to learn more.
Dimensions (DWH, inches) 8 7/8 x 9 7/8 x 12 inches
Dimensions (DWH, cm) 22 x 25 x 30.5 cm
Weight (lbs/kg) 19 lbs / 8.6 kg

*Some options may alter price.

Back to top
Company | Products | Consulting | Order
Ramsdell Pro Audio    Main    -  Contact   - Web Master  -   Email  (727) 823-8037
© 2004-2007 Ramsdell Pro Audio. All Rights Reserved.